UX11 IR Radiometric
- Surveying & Mapping
- In production
Real-time mapping and monitoring of wildfire fronts, day and night; general thermal + visible aerial data capture
Compliance & capability
Compliance
- Blue UAS
- No
- NDAA §848
- Cleared
- Green UAS
- Unconfirmed
- Remote ID
- Unconfirmed
- CMMC Level 2
- Unconfirmed
Capability
- LiDAR
- Unconfirmed
- Multispectral
- Unconfirmed
- Hyperspectral
- Unconfirmed
- Gas detection
- Unconfirmed
- SAR / radar
- Unconfirmed
- Payload swappable
- No
Authorized dealers
- Frontier Precision (ND)US nationwide; geospatial focusVisit site
Specifications
- Class
- Fixed-wing mapping UAV (hand-launched, ~1.6 kg) — dedicated radiometric-thermal + visible-spectrum sensor package for real-time fire-front mapping
- Primary Use / Category
- Real-time mapping and monitoring of wildfire fronts, day and night; general thermal + visible aerial data capture
- Wingspan / Length / Diameter
- Wingspan 1.2 m (47 in)
- Max Take-off Weight (lbs)
- 3.5 lbs (1.6 kg), payload included
- Endurance
- Up to 80 minutes
- Range
- Flying range 53 km (33 mi). Surface area covered: nominal (60% overlap) 1.2 km2 (300 ac) at 122 m (400 ft) AGL; maximum (60% overlap) 6.5 km2 (1,600 ac) at 1,000 m (3,280 ft) AGL. Communication range (Delair Link 2.4 GHz radio): 5 km in FCC configuration (up to 10 km), 3 km in CE configuration (up to 5 km).
- Max Wind
- 45 km/h (28 mph) wind resistance, light rain
- Payload Bay
- Integrated, non-swappable radiometric IR sensor + visible-spectrum imagery (dual capture)
- Payload Swappable
- No — integrated dual sensor
- Unique Payloads
- N/A — dedicated fire-front mapping sensor package (radiometric IR + visible); not a multi-payload platform
- Parachute
- Not stated in this datasheet. Take-off/landing is hand-launched / belly landing at a 30-degree angle, matching the shared UX11 airframe (per this datasheet's own spec table); no parachute is referenced. The base UX11's "no parachute, belly-landing" architecture (confirmed elsewhere via Delair's support FAQ) is presumed to carry over given the shared airframe, but this is not independently restated in this document.
- Software
- Delair Flight Deck Pro (mission planning and tracking; checklist, no-fly zone, flight simulator) — matches base UX11 software.
- Propulsion Type
- Presumed all-electric fixed-wing, consistent with the shared UX11 airframe; not independently restated in this two-page datasheet.
- Max Density Altitude
- Maximum altitude (MSL): takeoff at 5,000 m (16,400 ft); flight at 6,000 m (19,700 ft). Landing accuracy: 5 m (16 ft).
- Precipitation / IP Rating
- Light rain tolerated; no numeric IP rating published. Operating temperature range not stated in this datasheet (unlike the base UX11 datasheet, which specifies -20 to 45 degC) — left blank rather than assumed identical.
- Notes
- NEW ROW added 2026-08-27 from user-supplied UX11irRadiometriqueEN.pdf (© 2021, Delair SAS per document footer; hosted at delair.aero/wp-content/uploads/2025/07/, so the 2025 upload date reflects when the file was placed on the current site, not necessarily a content revision — flagged, not resolved). Marketing framing: "Automatic UAV for real-time mapping and monitoring of fire fronts in real time, easy to use, robust and lightweight"; field-proven claim: "Used on forest fires since summer 2023." Deployment time 5 min; cruise speed 54 km/h (34 mph). GSD (Sensor IR): 16.5 cm at 12 m (39 ft) AGL — a much closer-range figure than the RGB GSD figures used elsewhere on this sheet, consistent with a lower-resolution thermal sensor read at low altitude; see Cameras & Sensors sheet for the sensor-level row. C6 class-marking badge shown on the datasheet cover (matches the UX11 platform's confirmed EU class-C6 certification, elsewhere on this sheet). This row did not exist previously; the base UX11 row's Unique Payloads text and the Cameras & Sensors sheet's row 4 previously carried a brief, partially-sourced mention of this variant. This row supersedes that partial treatment with the full airframe-level spec now available from the primary-source PDF. Source: user-supplied UX11irRadiometriqueEN.pdf (https://delair.aero/wp-content/uploads/2025/07/UX11ir-Radiometrique-EN.pdf).
- Accuracy
- Not published for the radiometric IR sensor. The base UX11 RGB-camera mapping-accuracy figures recorded elsewhere on this sheet (PPK, <= 6 cm horizontal / <= 9 cm vertical) pertain to the RGB variant and are not independently confirmed for this thermal-only product.
- RTK / PPK Included
- Not explicitly stated in this datasheet (no GNSS/PPK section on either page, unlike the base UX11 datasheet). Left blank rather than assumed identical to the base airframe.
Cameras & sensors
- Visible/Thermal (EO-IR)Radiometric IR sensor (integrated, fire-front mapping variant)
- Thermal resolution
- Not disclosed in this datasheet
- GSD @ 400ft
- 16.5 cm at 12 m (39 ft) AGL — GSD given by Delair at a much lower reference altitude than the 400 ft (122 m) standard used elsewhere on this sheet; not a like-for-like comparison with the RGB camera rows.
UPDATED 2026-08-27 with the full user-supplied datasheet (UX11irRadiometriqueEN.pdf). Airframe-level specs (weight, endurance, range) moved to the Drones sheet's new dedicated "UX11 IR Radiometric" row. This datasheet does not disclose thermal sensor resolution, pixel pitch, or wavelength band — those fields left blank/not-disclosed rather than assumed from the base UX11 RGB sensor's specs, which do not apply to a thermal sensor. Marketed specifically for real-time wildfire-front mapping; field-proven since summer 2023 per the datasheet. This row previously combined "UX11 IR / UX11 IR Radiometric" as one entry; it is now split — see the new "UX11 IR" row immediately below for the separate non-radiometric variant. Source: user-supplied UX11irRadiometriqueEN.pdf (https://delair.aero/wp-content/uploads/2025/07/UX11ir-Radiometrique-EN.pdf).
Spotted a detail that looks wrong? Suggest an edit.

