The Industry
My experience, along with that of tens of thousands of other drone pilots, was shaped in part by DJI’s and Autel’s surge in the U.S. market, which spurred significant investment in research and development and evolutionary improvements in drones from the People’s Republic of China. The companies automated production to build reliable, low-cost enterprise drones while developing gold-standard service and support. Drone operators’ dependence on Chinese drones made it difficult for small-shop U.S. drone manufacturers to compete head-to-head.1
Although several U.S. and international manufacturers, funded by private investors and public stock offerings, emerged in the past decade to target specific market segments—public safety, cinematography, and industrial inspection—dozens of new U.S. manufacturers reached commercial scale across categories that had been DJI’s exclusive territory for a decade—from drone-as-first-responder platforms (Skydio, BRINC) to agricultural spray (Hylio, DMR Technologies, Rotor Technologies) to industrial inspection (Inspired Flight, Freefly, Apellix, WISPR) to fixed-wing VTOL mapping (Event 38, AeroVironment, and Censys) to confined-space inspection (Flyability, Cleo Robotics, Interactive Aerial, and Nolvis). DJI continued to dominate the use of drones to gather visual information and data on power lines and power plants, railroad beds, bridges, building façades, forests, storage tanks, flare stacks, airplane hulls, and a host of other infrastructure and industrial systems. Until now.
Since 2025, federal regulations2 have frozen the 170,000-215,000 PRC-made commercial drones at their current model generations. No new authorizations mean no new variants, no new firmware platforms that require fresh radio certifications, no DJI Care Refresh in the U.S., and a constrained parts supply.
Industry analysts estimate the existing fleet will age out over three to five years as components fail, software stagnates, and operators face fleet-replacement decisions without a PRC-made replacement path.
Without Updates, PRC Drones Will Be Retired
Commercial operators face three choices:
- Run existing PRC fleet to retirement — viable for 3-5 years, which constrains expansion.
- Migrate to US-made or foreign-allied alternatives — the path most operators will take.
- Wait for FCC reconsideration — uncertain outcome; not a procurement strategy.
A 2025 Pilot Institute survey of 8,056 operators found that:
- 43.4 percent expect the regulatory shift to have an extremely negative or potentially business-ending impact on their operations.
- 81 percent will reduce or cancel future drone investments if the ban remains in effect.
What the survey doesn’t say, and what is likely to happen, is a race among U.S. and allied drone manufacturers to carve out defined market segments, merge operations, and scale manufacturing—an evolutionary transformation like early automobile manufacturing and to computer hardware and software at the end of the last century.
The regulatory shift is the most significant single event in the US commercial drone market’s history — with an immediate impact greater than the introduction of Part 107 in 2016 or Remote ID in 2023.
Objective Guidance
US Drone Review helps you navigate this event. We help you research NDAA-compliant U.S. and internationally manufactured drones and make procurement decisions based on your operational needs. About 85 U.S. and international manufacturers offer a variety of fixed-wing, multi-copter, and other drone sizes, as well as sensor solutions. We provide information and editorial coverage of the innovators, drone and sensor equipment and services, and the evolving standards that are helping the U.S. drone industry mature. If there is a serious commercial drone with a real U.S. presence, it’s in US Drone Review.
1 DJI and US Market Size
Approximately 170,000-215,000 DJI and Autel commercial drones were in active US deployment as of mid-2025 — DJI accounted for 150,000-180,000 units (96.7 percent operator usage, per the Pilot Institute’s 2025 survey of 8,056 operators), and Autel accounted for 20,000-35,000 units (9.2 percent operator usage; DJI’s closest single-brand competitor, at 5-9 times smaller). Combined, those two manufacturers represented roughly 95 percent of US commercial drone usage. The remainder was split among US-made commercial platforms (Skydio leads at 4.9 percent operator usage), foreign-allied platforms (Wingtra, Parrot ANAFI USA, Flyability, others), and custom builds (7.9 percent of operators).
2 Federal Actions Affecting Chinese-made Drone Operations in the U.S.
Between October 2024 and December 2025, three federal actions effectively ended new commercial-market access for DJI and Autel:
- October 2024 — DJI was added to the DoD Section 1260H “Chinese Military Companies” list. Reputation impact and federal procurement scrutiny.
- January 6, 2025 — Autel added to DoD Section 1260H. Same designation as DJI, eliminating Autel’s “alternative-without-baggage” positioning.
- December 22, 2025 — FCC Covered List inclusion. Under the FY 2025 NDAA Section 1709, the FCC’s Public Safety and Homeland Security Bureau added all foreign-produced uncrewed aircraft systems and UAS critical components to the Covered List. The action specifically named DJI and Autel. Effect: no new FCC equipment authorizations are possible. New model imports, marketing, and sales are blocked in the US market. Existing units already in the US are grandfathered and remain legal to operate.
Secondary effects: Section 805 of the FY 2024 NDAA prohibits direct DoD procurement from 1260H entities, effective June 30, 2026, with an indirect procurement prohibition taking effect June 30, 2027. DJI’s CareRefresh program was discontinued in the United States in 2024 after CBP actions under the Uyghur Forced Labor Prevention Act (UFLPA) blocked most DJI shipments. DJI’s last three drone models were released worldwide, except in the United States.
Pending challenges: Both DJI and Autel have filed FCC Applications for Review (Autel in ET Docket 26-23 in January 2026; substantive Reply on May 11, 2026, arguing classified-material defects in the FCC’s process). Neither has been resolved as of late 2026.

